Home Product

Half-Cut Pneumatic Knife holder

MT-A310

Introduce

MT-A310 is our first non-cut through knifeholder with depth stroke control and precision blade. It masters the handling of multilayer material half cut application precisely and easily. With depth adjustment of 14mm stroke and precision blade roundness of up to +/0.005mm , it performs well in only the upper layer cut off/non-cut through at lower layer and can also reduce blade wear out for lifetime extending. MT-A310 is available in numerous variations that you can flexibly match to your application. Its versatility makes it suitable for medical adhesive tapes, foam tapes and protection film

Information Specification Download

MT-A310 Non-cut through pneumatic knife holder

Model MT-A310-BSK30

MT-A310

Min. slit width 23mm

Max. slit speed 100M/min(1)

Down-stroke 0~14mm

Air Pressure 3~6/kg/cm²

Blade O.D. Ø76.2mm

Guide-bar GB02/GB04/GB05

Feature Precision depth adjustment

Half-cut effective

Equipped high precision blade(+/-0.005mm)

Blade lifetime extended

Suitable Various Papers >>> kraft paper, silicone paper, releasing paper, decoration

wallpaper, masking paper, adhesive paper, thick paper

board, corrugated carton paper, sandpaper.

Various Plastic films >>> flexible laminated films, soft & rigid PVC films, BOPP,

PET, PE, PS, LDPE, PLA, SBS, various adhesive tape.

Cloth & fabrics >>> non-woven cloth, synthetic leather, natural cotton, mesh

cloth, medical cloth, label cloth...etc.

Foams >>> PSP foams,PE foams..etc

Drawing

(1) The maximum slitting speed is according to the actual materials, thickness and slitting results.

Catalog MT-A310 English version

Catalog MT-A310 Chinese version

Back to list

Precise Fine-tuning

With the classic body construction: one-body forming design, our non-cut through knife-holder MT-A310 can reach the narrow slitting requirement. The minimum slitting width 23mm with good performance.

Everything is

under control

Arbitrarily adjust the down stroke range of MT-A310 collaborate with the precisely grinding hard roller by the depth adjustment bolt,. Get the great performance of the non-cut through result: only cut off the upper layer, but the remain the lower layer intact.

Increasing

Production

Requirements

MT-A310 equipped the precise blade (the blade roundness is up to 5μm). The non-cut through effect can be well controlled by the down adjustment, also reduce the wear out of the blade and extending the lifetime.

Versatile

and Functional

Effectively reduce the application space with the handy dimension, having the stable performance and flexibly been used under the non-cut through slitting situation, especially suitable for the multi-layer composite like paper or plastic film.

檔案下載

Catalog MT-A310 English version

Catalog MT-A310 Chinese version

Recommend

Crush Cut Knives

Precision blade

Each blade will undergo special precision grinding and control of each blade's roundness to reach +/-0.005mm before the product leaves our factory. The precision blade with fine grinding hardness backing roller and through A310/A310H half-cut knife holder depth adjusting allows you to cut as depth as you want.

Detail

Guide-bar

GB05

GB05 is the new generation of the Guide-Bar series. It has the advantage of the linear guideway groove, side-fixed installation, lightweight, and fast delivery. Besides, there are two lengths of guide-bar to choose from, 2000mm and 2400mm.

Detail

Crush Cut Knives

130T Unibody Zigzag knife

The 130 teeth zigzag blade is made of tool steel (SKD-11) imported from Europe, processed by well heat treatment to increase its mechanical properties such as toughness and wear resistance. The blade tip is precisely ground to maintain an equal tooth pitch and peak, the slitting edge will generate the zigzag notch, to facilitate tearing along the notch. The zigzag blade is suitable for easy-tear applications such as medical tapes.

Detail

Bearing

5.0mm/6.2mm Bearing

Bearings for score blade, there are two different model , 697ZZ is for 5.0mm thickness and 17mm inner diameter score blade ; 6900RS is for 6.2mm thickness and 22mm inner diameter.

Detail